3. Name plate
Figure 3: Name plate at actuator (with example)
[1] Type designation
[2] Order number
[3] Current type, mains voltage, mains frequency
[4] Operating time in [s] for a part-turn movement of 90°
[5] Permissible ambient temperature
[6] Manufacturer name and address
[7] Actuator serial number
[8] Nominal current and power
[9] Max. torque and type of duty
[10] Enclosure protection and swing angle
[11]
Data Matrix code and (= CE-mark)
Descriptions referring to name plate indications
Type designation
Table 1:
Description of type designation (in our example: EQ 150 F04-F07-N)
NF04-F10150EQ
TypeEQ
Size (max. torque in Nm)150
Flange sizes for valve flange (combination flange)F04-F10
Flange without spigotN
Order number
The product can be identified using this number and the technical data as well as
order-related data pertaining to the device can be requested.
Please always state this number for any product inquiries.
On the Internet at http://www.auma.com > Service & Support > myAUMA, we offer
a service allowing authorised users to download order-related documents such as
wiring diagrams and technical data (both in German and English), inspection certificate
and the operation instructions when entering the order number.
7
EQ 40 – EQ 150
EQ 300 – EQ 600 Name plate
To Next Page
Loading...
