AUMA SA 07.1 - Table of Contents

This operation instruction is valid for the types: SA, SA(IP68), SAL, SAEL, SAH, SAR,
SAFM, SARFM, SAEx, SAREx.
TABLE OF CONTENTS
Page
1. Transport and Storage............................................. 1
2. Service Conditions................................................... 1
3. Mounting to the Valve/Gearbox ............................... 1
4. Manual Operation .................................................... 2
5. Electrical Connections ............................................. 2
• Terminal Access.................................................... 2
• Wiring Connections............................................... 3
• Completion of Electrical Connection ..................... 3
6. Test Run .................................................................. 4
• Operating Direction for Test Knobs....................... 4
7. Setting Of Limit Switching........................................ 5
• Setting the CLOSED End Position ........................ 5
• Setting the OPEN End Position............................. 5
8. Setting of DUO counter Gear or Four Gear Train ... 5
Limit Switching
9. Setting of Torque Switching..................................... 6
10. Setting of Mechanical Dial Position Indicator........... 6
11. Setting of the Potentiometer .................................... 7
12. Setting of the Current Transmitter RWG.................. 7
13. Machining of Stem Nut, Form A Output Drive.......... 7
14. Maintenance ............................................................ 8