AUMA SA 07.2 - Page 93

L
Language in the display 44
LED end position signalling 65
LEDs (indication lights) 51
Lifetime 81
Limit switching 57, 61
Local actuator operation 39
Local control 39
Local controls 39
Local setting 40
Lubrication 78
M
Main menu 41
Mains frequency 10, 10, 79
Mains voltage 10, 10, 25, 79
Maintenance 5, 77, 78
Maintenance required - indic-
ation on display
50
Manual operation 38, 79
Mechanical position indicator 52, 67
Menu navigation 40
Monitoring time 55
Motor heater 79
Motor operation 39
Motor protection 10, 79
Motors 79
Motor type 10
Mounting position 86
N
Name plate 9
Nominal current 10
Nominal power 10
Non-Intrusive 7
Not ready REMOTE - indica-
tion on display
49
O
Operating the actuator from
local controls
39
Operation 5, 38
Operation commands - indic-
ations on display
48
Order number 9, 10, 11
Out of specification - indica-
tion on display
50
Output contacts 53
Output drive type A 17
Output drive types 17
Output drive types B 21
Output signals 53
Output signals Potential 26
Output speed 9, 10
Overload protection 38
Overvoltage category 79, 81
P
Parity 55
Parking frame 36
Password 42
Password change 43
Password entry 43
Positioner - indication on dis-
play
48
Position indicator 52, 67
Position transmitter 11
Position transmitter (EWG) 63
Position transmitter (RWG) 66
Potentiometer 65
Power class 10
Power class for switchgear 11
Power factor 10
Power supply of electronics 25
Production, year 11
Protection on site 25
Protective measures 5
Push-to-run operation 40
Q
Qualification of staff 5
R
Range of application 5
Recycling 78
reductions 26
Reference operation 61
Remote actuator operation 40
Residual current device
(RCD)
26
Running indication 52
RWG 66
93
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2 Control unit - electromechanical
AC 01.2 Intrusive Modbus RTU Index