AUMA SAEx 07.2 Operation Instructions

376.3. External earth connection
386.4. Accessories for electrical connection
386.4.1. Actuator controls on wall bracket
396.4.2. Parking frame
407. Operation................................................................................................................................
407.1. Manual operation
407.1.1. Manual valve operation
417.2. Motor operation
417.2.1. Operating the actuator from local controls
427.2.2. Actuator operation from remote
427.3. Menu navigation via push buttons (for settings and indications)
437.3.1. Menu layout and navigation
447.4. User level, password
457.4.1. Password entry
457.4.2. Password change
467.4.3. Timeout for incorrect password entry
467.5. Language in the display
467.5.1. Language change
488. Indications..............................................................................................................................
488.1. Indications during commissioning
488.2. Indications in the display
498.2.1. Feedback signals from actuator and valve
518.2.2. Status indications according to AUMA classification
528.2.3. Status indications according to NAMUR recommendation
538.3. Indication lights of local controls
548.4. Optional indications
548.4.1. Mechanical position indication via indicator mark
559. Signals (output signals).........................................................................................................
559.1. Signals via Profinet
559.2. Status signals via output contacts (digital outputs)
559.2.1. Assignment of outputs
559.2.2. Coding the outputs
559.3. Analogue signals (analogue outputs)
5710. Commissioning (basic settings)...........................................................................................
5710.1. Type of seating: set
5810.2. Open switch compartment
5910.3. Torque switching: set
5910.4. Limit switching: set
6010.4.1. End position CLOSED (black section): set
6010.4.2. End position OPEN (white section): set
6110.5. Intermediate positions: set
6110.5.1. Running direction CLOSE (black section): set
6110.5.2. Running direction OPEN (white section): set
6210.6. Test run
6210.6.1. Direction of rotation at mechanical position indicator: check
6310.6.2. Direction of rotation at hollow shaft/stem: check
6310.6.3. Limit switching: check
6410.6.4. Reference operation position feedback: perform
6410.7. Close switch compartment
3
SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical
ACExC 01.2 Intrusive Profinet Table of contents

AUMA SAEx 07.2 Specifications

General

Brand	AUMA
Model	SAEx 07.2
Category	Controller
Language	English