AUMA SGExC 05.1 - Page 4

539.9.2 Limit switching: check
539.9.3 Reference operation position feedback: perform
539.10. Potentiometer setting
549.11. Electronic position transmitter RWG: set
559.12. Mechanical position indicator: set
559.13. Switch compartment: close
569.14. Operating time: set
5810. Corrective action....................................................................................................................
5810.1. Faults during commissioning
5810.2. Fault indications and warning indications
6210.3. Fuses
6210.3.1 Fuses within the actuator controls
6410.3.2 Motor protection (thermal monitoring)
6511. Servicing and maintenance...................................................................................................
6511.1. Preventive measures for servicing and safe operation
6511.2. Disconnection from the mains
6611.3. Maintenance
6711.4. Disposal and recycling
6812. Technical data.........................................................................................................................
6812.1. Features and functions of actuator
7012.2. Features and functions of actuator controls
7312.3. Modbus interface
7412.4. Service conditions
7512.5. Accessories
7512.6. Further information
7613. Spare parts.............................................................................................................................
7613.1. Part-turn actuators SGExC 05.1 – SGExC 12.1 via plug/socket connector with screw-type
terminals (KP, KPH)
7813.2. Actuator controls AUMATIC ACExC 01.2 with plug/socket connector and screw-type terminals
(KP, KPH)
8013.3. Actuator controls AUMATIC ACExC 01.2 with plug/socket connector and terminal blocks
(KES)
8214. Certificates..............................................................................................................................
8214.1. Declaration of Incorporation and EC Declaration of Conformity
8314.2. ATEX certificate
8815. Index........................................................................................................................................
90Addresses...............................................................................................................................
4
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
Table of contents ACExC 01.2 Intrusive Modbus RTU