AUMA SGExC 07.1-F07 User Manual

265.4. Accessories for electrical connection
265.4.1 Controls mounted to wall bracket
265.4.2 Parking frame
275.4.3 Protection cover
286. Operation................................................................................................................................
286.1. Manual operation
286.1.1 Manual operation: engage
286.1.2 Manual operation: disengage
286.2. Motor operation
286.2.1 Local actuator operation
296.2.2 Actuator operation from remote
306.3. Menu navigation via push buttons (for settings and indications)
306.3.1 Menu layout and navigation
316.4. User level, password
326.4.1 Password entry
326.4.2 Password change
336.5. Language in the display
336.5.1 Language change
357. Indications..............................................................................................................................
357.1. Indications during commissioning
357.2. Indications in the display
367.2.1 Feedback indications from actuator and valve
397.2.2 Status indications according to AUMA classification
407.2.3 Status indications according to NAMUR recommendation
417.3. Mechanical position indicator/running indication
427.4. Indication lights
438. Signals.....................................................................................................................................
438.1. Status signals via output contacts (digital outputs)
438.1.1 Assignment of outputs
438.1.2 Encoding of outputs
438.2. Analogue signals
449. Commissioning (basic settings)...........................................................................................
449.1. End stops in part-turn actuator
449.1.1 End stop CLOSED: set
459.1.2 End stop OPEN: set
459.2. Swing angle
469.2.1 Swing angle: modify
479.3. Type of seating: set
489.4. Bus address (slave address), baud rate, parity and monitoring time: set
489.5. Switch compartment: open
499.6. Torque switching: set
509.7. Limit switching: set
509.7.1 End position CLOSED (black section): set
519.7.2 End position OPEN (white section): set
519.8. Intermediate positions: set
529.8.1 Running direction CLOSE (black section): set
529.8.2 Running direction OPEN (white section): set
529.9. Test run
529.9.1 Direction of rotation: check
3
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
ACExC 01.2 Intrusive Modbus RTU Table of contents

AUMA SGExC 07.1-F07 Specifications

General

Brand	AUMA
Model	SGExC 07.1-F07
Category	Controller
Language	English