Index
35
A
ATEX certificate 83
Accessories (electrical
connection)
26
Actual value - indication on
display
37
Actuator operation at the local
controls
28
Actuator operation from remo-
te
29
Ambient temperature 75
Analogue signals 43
Applications 6
Approved mark 9
Assembly 12
B
Baud rate 48
Bus address 48
Bus cables 17 , 20 , 24
C
Cable set 26
Commission number 9
Commissioning 5
Commissioning (indications
on display)
35
Connecting cable 26
Control 9
Corrective action 58
Corrosion protection 11 , 74
Cross section 17
Current consumption 16
D
DUO limit switching 51
Declaration of Incorporation 82
Digital outputs 43
Direct display via ID 31
Direction of rotation 52
Directives 5
Display (indications) 35
Disposal 67
E
EC Declaration of Conformity 82
EC type examination certifica-
te
9
EMC 16
Electrical connection 16
Electronic position transmitter 54
Enclosure protection 74
End stops 44
Error - indication on display 35
Explosion protection 9
F
Failure - indication on display 41
Fault - indication on display 39
Function check - indication on
display
40
H
Handwheel 12
I
Identification 8
Indication lights 42
Indications 35
Indications on display 35
Indicator disc 41 , 55
Inspection record 9
Intermediate position indicati-
on via LEDs
42
Intermediate positions 51
Intrusive 10
L
LEDs (indication lights) 42
Language in the display 33
Limit switching 50 , 53
Line topology 20 , 24
Local actuator operation 28
Local control 28
Local controls 28
Local setting 30
Loop topology 20 , 24
Lubrication 66
M
Main menu 31
Mains frequency 17
Mains voltage 17
Maintenance 5 , 65 , 66
Maintenance required - indica-
tion on display
40
Manual operation 28
Mechanical position indicator 41 , 55
Menu navigation 30
Monitoring time 48
Motor heater 19 , 23
Motor operation 28
Multiport valve - Indications
on display
38
N
Name plate 8 , 17
Network types 16
Non-Intrusive 10
Not ready REMOTE - indicati-
on on display
39
88
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
Index ACExC 01.2 Intrusive Modbus RTU