AUMA SGExC 07.1-F07 User Manual

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Preserve operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting) AUMATIC AC 01.2 Modbus
●
Manual (Device integration Fieldbus) AUMATIC AC 01.2 Modbus
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
61.2. Range of application
61.3. Warnings and notes
71.4. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
92.2. Short description
113. Transport, storage and packaging........................................................................................
113.1. Transport
113.2. Storage
113.3. Packaging
124. Assembly................................................................................................................................
124.1. Mounting position
124.2. Ball handle: fit to handwheel
124.3. Part-turn actuator to valve: mount
134.3.1 Coupling
144.4. Mounting positions of local controls
154.4.1 Mounting positions: modify
165. Electrical connection.............................................................................................................
165.1. Basic information
185.2. Connecting via plug/socket connector with screw-type terminals (KP, KPH)
185.2.1 Terminal compartment: open
185.2.2 Cable connection
205.2.3 Bus cables: connect
215.2.4 Terminal compartment: close
225.3. Connecting via plug/socket connector with terminal blocks (KES)
225.3.1 Terminal compartment: open
235.3.2 Cable connection
245.3.3 Bus cables: connect
255.3.4 Terminal compartment: close
2
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
Table of contents ACExC 01.2 Intrusive Modbus RTU

AUMA SGExC 07.1-F07 Specifications

General

Brand	AUMA
Model	SGExC 07.1-F07
Category	Controller
Language	English