Radiator
Valves
Checklist
The Wireless Coordinator must be in pairing mode.
Ensure that the radiator valves are in pairing mode (Refer to JGTRV Instruction
Manual). A maximum of 3 radiator valves can be paired with each thermostat.
Please pair TRV’s on a room by room basis.
If you are using the optional system receiver configured to RX1 for remote
boiler switching, ensure this has been powered up and the red flashing LED
has gone steady.
37
www.speedfitUFH.co.uk
1
2
3
Installation - Pairing the Radiator Valve(s)
INSTALLATION
To Next Page
Loading...
