Aura JGSTATW2W - Installation - Testing Pairing with Single Room Receiver

Long press to exit
to home screen or
continue to change
device settings.
Refer to page 57.
Use
to increase
temperature to
30ºC and then
press
Green LED on
Green LED off
Use to
decrease
temperature to
10ºC and then
press
If you are using
the optional
system receiver
configured to RX1
please check that
the green light
goes on when the
temperature is
raised and off
when reduced.
If pairing for your system is complete, please take the Coordinator
out of pair mode. Press for 5 seconds and light will stop flashing.
43
www.speedfitUFH.co.uk
Installation - Testing Pairing with Single Room Receiver
INSTALLATION