Deleting Wiring Centre from the network.
Press for 15
seconds to
delete the wiring
centre from the
network.
All LED’s will flash
momentarily and then the
wiring centre will be
deleted from the network.
All thermostats relating to
the wiring centre will
need to be reconfigured
and paired with the new
Wiring Centre.
If the wiring centre cannot be deleted
as above, use the method below.
Please follow
step 1 on page
47. Select
password 46.
You are now
ready to
install your
new wiring
centre.
Before replacing any device it must be removed from the Zigbee
network. Please ensure the Wireless Coordinator is also in pairing mode.
55
www.speedfitUFH.co.uk
Installation - Replacing Product
INSTALLATION
To Next Page
Loading...
