Before replacing any device it must be removed
from the Zigbee network. Please ensure the
Wireless Coordinator is also in pairing mode.
Note: If replacing a thermostat connected to the
wiring centre, you can use the replacement method.
Deleting thermostat from the network.
Your thermostat
will now be
deleted from the
network. You are
now ready to
install your new
thermostat. Please
note password 48
can also be used
to delete other
devices that are
offline.
Please follow
step 1 on page
47. Select
password 48.
The unit
previously
connected to
the wiring centre
will be replaced.
56
JGSTATW Instruction Manual
Installation - Replacing Product
To Next Page
Loading...
