AUSA D 900 AP - Wheel;Tyre Condition; Removing the Wheel

D 900 AP / D 1000 AP / D 1000 APG
55
(fi g. 1)
 Wheel/Tyre condition
Check the tyres for possible damage or wear. Replace if necessary.
Do not rotate the tyres if they are directional.
For correct operation their rotation must maintain a specific direction.
 Removing the wheel (fig. 1)
Loosen the nuts and raise the dumper. Place a support beneath it. Remove the nuts and
then remove the wheel.
When assembling, apply lubricant to the threads. Slowly tighten the nuts in a criss-cross
sequence, applying a final torque of 425 Nm.
a. Coned part of the wheel nut
WARNING!!
Always use the recommended wheel nuts. If you use different wheel nuts the wheel may
be damaged.
Periodic
maintenance
operations
a