Need help?Do you have a question about the Autel MaxiCharger AC Compact and is the answer not in the manual?
General| Charging Cable Length | 25 feet |
|---|---|
| Connector Type | J1772 |
| Operating Temperature | -22°F to 122°F (-30°C to 50°C) |
| Enclosure Rating | NEMA 4 |
| Charging Standard | SAE J1772 |
| Type | AC Charger |
| Product Type | Electric Vehicle Charger |
| Input Voltage | 208-240V |
| Output Voltage | 240V AC |
| Weather Resistance | IP65 |
| Mounting Type | Wall-mounted or pedestal |
| Communication Protocols | Wi-Fi, Ethernet |
| Protection Features | Overvoltage, Overcurrent |
| Compatibility | All J1772 electric vehicles |
| Certifications | UL Listed |
Explains text conventions like bold text, notes, and important messages used in the manual.
Defines hazard levels (DANGER, WARNING, CAUTION) to alert users of risks.
Provides critical safety warnings for installation and operation of the charger.
Outlines correct procedures for disposing of the charging station and its components environmentally.
Clarifies the purpose and application of the MaxiCharger AC Compact EV charger.
Details the physical components and indicators of the MaxiCharger unit.
Explains the meaning of each LED indicator and their states (e.g., solid green, flashing yellow).
Lists detailed technical data including output rating, input voltage, wiring schemes, and connector type.
Provides specifications for AC input and RS485 cables, including cross-section requirements.
Covers initial steps before installation, including checking package contents and preparing tools.
Lists the necessary tools required for a successful installation of the charger.
Specifies criteria for selecting an appropriate and safe mounting location for the charger.
Details the three available options for routing AC input and communication cables into the unit.
Step-by-step instructions for physically mounting and connecting the main charger unit.
Guides the user through connecting the AC power supply wires to the charger terminals.
Instructions on how to connect the Ethernet cable for network communication.
Instructions for connecting the RS485 cable for serial communication.
Final steps to ensure the charger is securely attached and ready for operation.
Explains how to power on the charger and its initial self-check process.
Details the methods to initiate an electric vehicle charging session.
Describes the procedures for safely ending an ongoing charging session.
Provides a list of common issues and their corresponding solutions for quick problem resolution.
Offers contact details for Autel's technical support and customer assistance.
A comprehensive list of fault codes generated by the charger and their meanings.
To Next Page
