4
2.1 Safety Warnings
The safety messages herein cover situations Autel is aware of.
Autel cannot know, evaluate or advise you as to all of the possible
hazards. You must be certain that any condition or service
procedure encountered does not jeopardize your personal safety.
Read and follow all warnings and instructions before installing
and operating the MaxiCharger.
Only a qualified electrician is allowed to install, service, repair,
and relocate the MaxiCharger.
The user must not attempt to service or repair the
MaxiCharger as it does not contain user-serviceable parts.
Switch off input power before installing the MaxiCharger.
Keep the power off until it is fully installed and secure.
Do not use explosive or readily flammable substances near the
MaxiCharger.
Do not use the MaxiCharger if the charging cable is frayed,
broken or otherwise damaged, or fails to operate.
Do not use the MaxiCharger if the enclosure or the EV
connector is frayed, broken or otherwise damaged, or fails to
operate.
In the event of danger and/or an accident, a qualified
electrician must immediately disconnect the electrical supply
from the MaxiCharger.
To Next Page
Loading...
