EasyManua.ls Logo

Autel MaxiCharger - Preparation

Autel MaxiCharger
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
4.2 Preparation
Install the charging station on a flat and vertical surface
capable of supporting its weight (e.g. a finished brick or
concrete wall, a pedestal, etc.). The maximum weight of a
charging station is about 6 kg (13 lbs.).
Install the charging station in a location that allows the charge
cable to remain within its bending tolerance.
The recommended installation height is between 850 and
1150 mm. The minimum outdoor height is 600 mm and that
of indoor is 450 mm.
Position the charging station in a location where it is not
vulnerable to being damaged.

Other manuals for Autel MaxiCharger

Related product manuals