Autel MaxiCharger - Start Charging

46
5.2 Start Charging
5.2.1 Cable Model
1. Remove the charging handle from the cradle of the
charger.
2. Insert the charging handle into the charging port on the
EV.
3. Choose from the following ways to start a charge session:
 Tap the RFID card on the RFID reader.
 Use the Autel Charge app by tapping Start on the
Charge screen.
 If a charging schedule is set in the Autel Charge app,
the charging station will initiate a charge session
automatically as scheduled. (Scheduled charging
case.)
 If the Plug-and-charge function is enabled in the
Autel Charge app, the charging station will
automatically start charging once the charging
handle is properly connected. (Plug-and-charge
case.)