50
5.3.2 Socket/Shutter Model
1. To stop charging, choose either of the following two ways:
Wait for the charge session to end and no further
actions are required in the case of scheduled
charging or plug-and-charge.
—
The charging LED will light solid green.
—
The Autel Charge app displays that the EV is fully
charged.
—
If the charging station has a display, it will show
that the EV is fully charged.
End the charge session by tapping the RFID card on
the RFID reader again or via the Autel Charge app by
tapping Stop on the Charge screen.
2. Remove the charging handle from the charging station
socket outlet and the EV charging port.
NOTE
For detailed instructions on how to use the Autel
Charge app, please contact your sales
representative for relevant documents.
To Next Page
Loading...
