16
4. Manual Selection
Auto VIN Scan
The MaxiCheck diagnostic system features the latest VIN-based Auto VIN
Scan function to identify vehicles and scan all the diagnosable ECUs and
run diagnostics on the selected system. This function is compatible with
2006 and newer vehicles.
To perform Auto VIN Scan
1. Tap the Diagnostics application button from the MaxiPRO Job
Menu. The Vehicle Menu displays.
2. Tap the VIN Scan button on the top toolbar to open the dropdown
list.
3. Select Auto Detect. Once the test vehicle is identified, the screen
will display the vehicle VIN. Tap OK at the bottom right to confirm
the vehicle VIN. If the VIN does not match with the test vehicle’s
VIN, enter VIN manually or tap Read to acquire VIN again.
Figure 4- 2 Sample Auto VIN Screen
To Next Page
Loading...
