8
Keyboard
No solvents such as alcohol are allowed to clean the keypad or display.
Use a mild nonabrasive detergent and a soft cotton cloth. Do not soak the
keypad as the keypad is not waterproof.
Battery Charging
The TPMS tool has a 3.7 V built-in lithium-ion polymer rechargeable battery.
There are two means of battery charging:
✓ To charge battery by power adapter
1) Locate the power port of the device.
2) Connect the device and the power source with the adapter.
✓ To charge battery by USB cable
1) Locate the USB port of the device.
2) Connect the device and the computer with the USB cable.
For optimum performance, always keep your tool sufficiently charged. It is
recommended that you charge the tool for over 2 hours before the first use.
NOTE
Only use the power adaptor or USB cable that is included in our pack to
charge this tool. The use of un-approved power supplies may damage your
tool and void the tool warranty.
Power Up by DLC
The tool can also be powered via the vehicle Data Link Connector (DLC).
Just follow the steps below to turn on the TPMS tool:
1) Connect the OBD II Cable to the TPMS tool.
2) Find DLC on vehicle.
⚫ A plastic DLC cover may be found for some vehicles and you need to
remove it before plugging the OBD II cable.
3) Plug OBD II cable to the vehicle’s DLC.
4) Power up the TPMS tool by pressing the Power button, and wait for the
Main Menu to appear.
To Next Page
Loading...
Need help?
General
