61
Erase Codes
⚫ This function is performed with key on engine off (KOEO). Do not start
the engine.
1) Use the UP/DOWN scroll buttons to select Erase Codes from
Diagnostics Menu and press the Y button (Figure 6-3).
2) A confirm screen will show up. Press the corresponding FUNCTION
button Yes to continue; otherwise press the corresponding FUNCTION
button NO to exit.
Figure 6-6
3) If the codes are cleared successfully, an “Erase Done!” message
shows on the screen. Press any key to continue.
Figure 6-7
Live Data
In this function, you can not only read the live data but also retrieve data for
later review.
1) To view live data, use the UP/DOWN scroll button to select Live Data
from Diagnostic Menu and press the Y button (Figure 6-3).
To Next Page
Loading...
