27
Figure 4-16
3) If user is going to retest the sensor, a prompt will come up asking for
your confirmation.
Figure 4-17
4) Select Yes to delete all test records and enter test mode. Or select No
to reserve the previous data and check the remaining untested
sensors.
TPMS Relearn
This function, which provides users with quick access to the vehicle’s ECU,
enables users to do TPMS diagnostics, such as reading/writing sensor IDs
on vehicle ECU, reading/ clearing codes of TPMS system, reading TPMS
live data, retrieving TPMS ECU information, and performing actuation tests
and special functions, and to save data for later reviews and printing.
1) Connect the TPMS tool to the vehicle’s DLC with the OBD II cable.
Press the POWER button to turn on the tool.
2) Turn the ignition on but do not start the engine.
3) Make sure the testing mode is set to All Wheels mode in System
To Next Page
Loading...
