9
Figure 3-2
System Setting
The tool allows you to make the following adjustments and settings.
1) Market: Selects the area of work, Europe or America.
2) Language: Selects the desired language.
3) Pressure Unit: Sets the pressure unit in kPa, Psi or Bar.
4) Temperature Unit: Sets the temperature unit in degree Celsius or
Fahrenheit.
5) Distance Unit: Sets the distance unit in km or mile.
6) ID Format: Sets the ID displaying in Hexadecimal or Decimal.
7) Beep Set: Turns on/off key-press beep.
8) Wheels: Sets the test modes in One Wheel or All Wheels.
9) Power-off: Sets the time to power off automatically.
10) Date: Allows setting date information of the tool.
11) About: Allows viewing important information of the tool.
⚫ Setting will remain until change to the existing settings is made.
To Enter the Setting Menu
From the Main Menu: Use the UP/DOWN and LEFT/RIGHT scroll button to
select Setting, and press the Y button. The Setting menu displays as
below.
To Next Page
Loading...
