29
9) The TPMS Diagnosis option allows user to write IDs to vehicle, read
IDs from vehicle, read/clear TPMS codes, read TPMS live data,
perform active test and special functions.
⚫ The TPMS Diagnosis function varies by the vehicle being tested.
NOTE
In this manner, the scan tool will communicate with the vehicle being tested.
If there is a linking error, a notice screen will show up. Please refer to
Product Troubleshooting on page 16 for more details.
Write IDs to Vehicle
There are two ways to write IDs to vehicle:
1) Select OBD II Relearn to write IDs to vehicle directly without
performing further procedures.
Once the sensor IDs are successfully written, a confirm screen will
show up. Press any key to continue.
Figure 4-20
NOTE
The OBD II Relearn function is not supported by all vehicles. If the OBD II
Relearn item doesn’t present, please write the ID by Write IDs to Vehicle
under TPMS Diagnosis.
2) From the TPMS Diagnosis Menu, use the UP/DOWN scroll button to
select the Write IDs to Vehicle, and press the Y button.
To Next Page
Loading...
