AUTOFLAME Mk8 MM - VSD Channel

3 End User Operation
3.5.2 VSD Channel
Figure 3.5.2.i VSD Channel
Press or in the Channels screen in Figure 3.5.1.i to view the VSD Channel 5 or
VSD Channel 6 output and input history, respectively. Alternatively, pressing on the VSD in the Home
screen in Figure 3.1.i will also display the VSD Channel screen.
This data is logged for 24 hours on the MM. Use the buttons to change the timescale of the
data displayed, and press and drag on the axis to zoom in/out of the graph.
This information is logged for 2 years on the DTI when connected with the MM.
Note: Power cycling the MM or changing fuel will reset the 24 hour history data log on the MM.
Page 24 Mk8 MM End User Guide 22.05.2017