AUTOFLAME Mk8 MM - System Configuration Screen

3 End User Operation
Figure 3.19.i
Press in the Home screen in Figure 3.1.i to access the System Configuration screen. From
this screen is is possible to:
 Change language (password protected)
 View all options
 View all parameters
 View all expansion options
 Change boiler configuration display in Home screen (password protected)
 Access online changes (password protected)
 Acess single point change (password protected)
 Set clock (password protected)
 Set run times (password protected)
 Set bottom blowdown scheduel if enabled (password protected)
 View operating manual
 View commission data
 View real-time diagnostics
 View system log
In the top left corner, the serial number and bootloader of the MM are shown, and in the top righ, the
BC, MM and Display software versions are shown.
22.05.2017 Mk8 MM End User Guide Page 30
3.9 System Configuration Screen