AUTOFLAME Mk8 MM - 1 Overview and Benefits; Features and Benefits

1 Overview and Benefits
22.05.2017 Mk8 MM End User Guide Page 1
1 OVERVIEW AND BENEFITS
1.1 Features and Benefits
Micro-Modulation (MM) / Flame Safeguard
 Fuel/ air ratio control
 Full colour touch screen
 120V or 230V standard operation 50/60Hz
 Controls up to 5 servomotors and 2 variable speed drives (VSD/ VFD)
 4 independent fuel programmes
 Fully adjustable PID load control for temperature or pressure
 Internal flame safeguard – full flame supervision with self-check UV or IR
 Dual flame scanner operation (IR and UV scanners)
 Gas valve train leak supervision and high/low gas pressure monitoring
 Air pressure proving and monitoring
 128 lockouts, errors, alarms and warnings stored with date, time, phase and reset
 1000 entry system log stored with date, time and status
 Online diagnostics showing system electronics information
 Single point change for adding, removing and adjusting fuel/air positions on fuel-air curve
 Golden start position for optimum ignition position
 Flue gas recirculation start position
 Variable servomotor travel speed
 Burner control safety times user selectable
 External voltage/current load control and setpoint adjustment
 Outside temperature compensation of boiler setpoint
 Second setpoint and run times scheduling
 Hand/auto/low flame hold firing modes
 Various boiler load detectors available
 Fuel flow metering capability – instantaneous and totalised
 Fuel flow feedback
 Multi-burner capability with synchronised firing rate up to 10 MMs
 4-20mA (0-20mA) / 0-10V (2-10V) input for external modulation
 4-20mA (0-20mA) / 0-10V (2-10V) output confirming firing rate
 Fully metered combustion control for commissioning based on equivalence ratio and excess air
 Draft control to maintain stack pressure

Password protection of all safety related functions
 Infra-red port for upload/download of commission data