28 © 2001 Directed Electronics, Inc. Vista, CA
NOTE: The Valet
®
pulse count feature (10) and the channel three timed output (11) have five
possible settings each. Pressing the disarm (or channel 2) button will toggle through all the possi-
ble settings.
5. Release the Valet
®
/program switch.
■ Other features can be programmed.
■ The Learn Routine can be exited if programming is complete.
Press and release the Valet
®
/program switch the number of times necessary to advance from the feature you just
programmed to the next one you want to program. Then press the Valet
®
/program switch once more and HOLD it.
For example, if you just programmed the third feature and you would like to program the seventh feature in the
menu, you would: Press and release the Valet
®
/program switch four times. Then press it once more and HOLD it.
The siren would chirp seven times to confirm access to the seventh feature.
To exit the learn routine, do one of the following:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.
4. Press the Valet
®
/Program switch too many times.
to exit the learn routine
to access another feature
once a feature is programmed
To Next Page
Loading...
