4 © 2001 Directed Electronics, Inc. Vista, CA
installation points to remember
This product represents many years of research and development. It is a sophisticated product that should be
installed by experienced security installers only. Please do not attempt installation of this product without
reading this guide. The system has been designed to provide the ultimate in security, coupled with limitless con-
venience and expansion options.
This product is not intended for consumer installation and will have NO WARRANTY unless it is installed by an
authorized dealer.
Do not disconnect the battery if the vehicle has an anti-theft coded radio. If equipped with an airbag, avoid dis-
connecting the battery if possible.
IMPORTANT! Many airbag systems will display a diagnostic code through their warning light after
they lose power. Disconnecting the battery requires this code to be erased, a procedure that can
require a trip to the dealer.
Before beginning the installation:
■ Check with the customer on status LED location.
■ Remove the domelight fuse to prevent accidentally draining the battery.
■ Roll down a window to avoid being locked out of the car.
After the install:
■ Test all functions. The “Using Your System” section of the Owner’s Guide is very helpful when testing.
■ When testing, don’t forget that this system is equipped with Nuisance Prevention
®
Circuitry. NPC
™
can bypass
both instant trigger zones, making them appear not to work.
tools required
This is a general list of tools required to complete the installation of this DEI
®
security system in most vehicles.
Some vehicles may require additional tools.
■ Digital multi-meter
■ Wire cutters/strippers
■ Solderless terminal crimpers
■ Cordless power drill
■ Torx driver set
■ Nutdriver and/or socket set
■ Panel removal tool
■ Drill bit set
■ Phillips head screwdriver
■ Work light
To Next Page
Loading...
Need help?
General
