© 2001 Directed Electronics, Inc. Vista, CA 29
system features menu
feature descriptions
1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is
used. When set to passive, the system will arm automatically 30 seconds after the last door is closed. To alert
the consumer of passive arming, the siren will chirp 20 seconds after the door is closed. This provides the con-
sumer with an audible warning prior to the system actually arming. At the 30 second mark, the system will arm
but the siren will not chirp.
2 AUDIBLE ARM/DISARM CONFIRMATION ON/OFF: This feature controls the chirps that confirm the arming and
disarming of the system. In the ON setting (default) the siren will provide audible confirmation when arming and
disarming the system. If programmed to the OFF position no siren chirps will be heard when arming and disarm-
ing.
3 IGNITION-CONTROLLED LOCKING ON/OFF: When turned on, the vehicle doors will lock three seconds after the
ignition is turned on.
FEATURE NUMBER ONE-CHIRP SETTING TWO-CHIRP SETTING
1 Active arming Passive Arming
2 Audible arm/disarm confirmation on Audible arm/disarm confirmation off
3 Ignition-controlled locking on Ignition-controlled locking off
4 Ignition-controlled unlocking on Ignition-controlled unlocking off
5 Active locking Passive locking
6 0.8 second door lock pulses 3.5 second door lock pulses
7 Single unlock pulse Double unlock pulse
8 Door trigger error chirp on Door trigger error chirp off
9 No function No function
10 Valet switch input: 1 pulse Valet switch input: 2-5 pulses
11 Channel 3: validity Channel 3: latched/latched, reset with
ignition/30-second timed/second
unlock/delayed accessory output
NOTE: Default settings are indicated in bold type.
To Next Page
Loading...
Need help?
General
