© 2011 Automated Logic Corporation. All rights reserved throughout the world. Automated Logic Corporation, the Automated Logic logo,
WebCTRL, EIKON, BACview, SuperVision, and InterOp are registered trademarks, and Alert is a trademark of Automated Logic Corporation.
BACnet
®
is a registered trademark of ASHRAE. All other brand and product names are trademarked by their respective companies.
Contents
What is the Room Controller? ..................................................................................................... 1
Driver and control program ........................................................................................... 1
Specifications .............................................................................................................. 2
Inputs .......................................................................................................................... 3
Digital outputs ............................................................................................................. 3
Analog outputs ............................................................................................................. 3
Room sensors .............................................................................................................. 4
BACviews ..................................................................................................................... 4
Display......................................................................................................................... 5
Buttons ........................................................................................................................ 5
Creating a custom control program ............................................................................... 6
Using this document ................................................................................................................. 7
METHOD A: Installing a Room Controller in a WebCTRL system..................................................... 8
To mount the Room Controller .................................................................................................... 8
Wiring for power ........................................................................................................................ 8
To wire for power .......................................................................................................... 8
To address the Room Controller .................................................................................................. 9
Wiring for communications with a controller network .................................................................. 10
Wiring specifications .................................................................................................. 10
To wire the Room Controller to the controller network .................................................. 10
Wiring an RS room sensor to the Room Controller ...................................................................... 11
Rnet wiring specifications ........................................................................................... 11
To wire an RS room sensor to the Room Controller ....................................................... 12
Wiring inputs and outputs ........................................................................................................ 13
Wiring specifications .................................................................................................. 13
To wire inputs and outputs .......................................................................................... 13
To set display options for a networked RC642D Room Controller ................................................. 15
Downloading the Room Controller ............................................................................................ 16
To download in WebCTRL ............................................................................................ 16
To assign inputs or outputs to points ......................................................................................... 17
Input values ............................................................................................................... 17
Output values ............................................................................................................. 18
Resolution values ....................................................................................................... 18
Offset/Polarity values ................................................................................................. 19
To set up the driver .................................................................................................................. 20
Driver ......................................................................................................................... 20
Device ........................................................................................................................ 21
Notification Classes ................................................................................................... 21
Calendars .................................................................................................................. 22
Common and Specific Alarms ..................................................................................... 22
Custom Translation Tables .......................................................................................... 22
Switch and Jumper Positions ...................................................................................... 23
Display Options .......................................................................................................... 23
To communicate through the local access port ........................................................................... 23
To set up a Local Access connection in WebCTRL ......................................................... 24
To Next Page
Loading...
Need help?
General
