To Next Page

To Previous Page

1 Product Introduction

1.1 Features

TM Series module type temperature controller realizes high-speed controlling with superior

sampling cycle (TM4 – 100 ms, TM2 – 50 ms). Side connector connection makes less wiring

work and close mounting possible for up to 31 units without additional power and communication

wires for expansion modules. PC parameter setting and monitoring is possible via RS485

communication or dedicated USB cable. In addition, more reliable temperature controlling can

be realized via various convenient functions.

 Multi channels (4-CH/2-CH) simultaneous controlling possible

 Each channel insulated – Dielectric strength 1,000VAC

 No communication and power supply for expansion modules required using module

connectors : Up to 31 module (124 channels/62 channels) expansion possible

 High-speed sampling cycle (100ms/50ms)

 Heating/Cooling simultaneous controlling

 Heater burn-out detection via a current transformer (CT).

 PC parameter setting via PC (USB cable and RS485 communication)

: Supports comprehensive device management program (DAQMaster)

※ Communication coverter, sold separately

: SCM-WF48 (Wi-Fi to RS485·USB wireless communication converter),

SCM-US48I (USB to RS485 converter), SCM-38I (RS232C to RS485 converter),

SCM-US (USB to serial converter)

: Enables to set parameters via SCM-US which does not required supplying power

and wiring

Easy maintenance via connector type connection

: Sensor input connector, control output connector, power/communication connector

 Multi-input/multi-range

 Heater disconnection alarm (CT function)

※ CT, sold separately: CSTC-E80LN, CSTC-E200LN, CSTS-E80PP

Autonics TM4-N2SB User Manual

Questions and Answers: