Autonics TM4-N2SB User Manual

3 Dimensions
© Copyright Reserved Autonics Co., Ltd. 29
3.1.3 Mounting with bolts
1st Pull each rail lock to up and down.
2nd Insert bolts to fix it on rail lock. (fixing torque is 0.5 to 0.9 N•m).
3.1.4 Mounting on DIN rail
(1) Installation/Removal method of a single module
 Installing
1st Hang the top rail lock to DIN rail.
2nd Push and press the module to down direction.

Autonics TM4-N2SB Specifications

General

Brand	Autonics
Model	TM4-N2SB
Category	Temperature Controller
Language	English