Autonics TM4-N2SB User Manual

3 Dimensions
30 © Copyright Reserved Autonics Co., Ltd.
 Removing
1st Press the module to down direction.
2nd Pull the module body forward.
(2) Installation/Removal method of multiple modules
 Installing
1st Pull each rail lock switch up and down.
2nd Mount the module body to the DIN rail and then push the rail lock in.
 Removing
1st Pull each rail lock switch up and down.
2nd Remove the body from the DIN rail.

Autonics TM4-N2SB Specifications

General

Brand	Autonics
Model	TM4-N2SB
Category	Temperature Controller
Language	English