Autonics TM4-N2SB User Manual

5 Preparation and Startup
© Copyright Reserved Autonics Co., Ltd. 39
(2) TM4-N2SB model (SSR drive output)
※1. Using SCM-US enables only setting parameter. To monitor and control temperature
requires the additional 24VDC power supply.
 Do not connect SCM-US and RS485 communications cables at the bottom at the same
time.
 Use an isolated type SSR.

Autonics TM4-N2SB Specifications

General

Brand	Autonics
Model	TM4-N2SB
Category	Temperature Controller
Language	English