Autoshop Smarttool - Replace ECM; Auto Program; Read KEYID - ECMID Store in SCU and Auto OFF;ON FOB

SMARTTOOL – BEST PROGRAMMER SMART KEY HONDA, YAMAHA, SUZUKI AND PIAGGIO
13
http://autoshopvn.com
Step 15: Press key button of FOB 5 times Step 16: Press key button of FOB 9 times
Successfully!!!
Notes:
- Turn OFF the unused FOBs.
- Use FOB which is synced with the new SCU.
- If you don’t have ECMID, Select “AUTO PROGRAM””READ KEYID” to get ECMID.
- After success, you can Select “READ KEYID” to check ECMID.
1.1.5 Replace ECM
Purpose:
- When ECM is damaged.
- The device only introduces ECM replacement.
Preparation:
- SMTF00- SMART TOOL.
- The new ECM.
The steps taken on the Smart Tool
- Step 1 : Remove old ECM
- Step 2 : Replace new ECM
- Step 3 : ON IG
- Step 4 : Success
1.2 AUTO PROGRAM.
1.2.1 Read KEYID - ECMID store in SCU and auto OFF/ON FOB
 Purpose
Read KEYID and ECMID to add new key.
OFF or ON FOB without the original FOB.
 Preparation
SMTF00- SMART TOOL.
SMTF01- Cable for HONDA PCX/SH125/150/MODE
SMTF08- KEY ADAPTER.
SCU (smart key control unit), the new FOB.
 The steps taken on the Smart Tool