Autoshop Smarttool - Odometer Adjustment Common Errors

SMARTTOOL – BEST PROGRAMMER SMART KEY HONDA, YAMAHA, SUZUKI AND PIAGGIO
38
http://autoshopvn.com
Notes
- Connect cable to 24C/Renas/9S12 on ODO Adapter.
- If incorrect value more than 20km, stop and check connection points, cable.
Reset ODO function
- Used when EEPROM data of ODO is error:
- The ODO screen shows (----------)
- The ODO screen don’t show the kilometer value.
Step 1: Select “ RESTORE ORG. DATA” Step 2: Press Enter
Step 3: Unplug ODO cable Step 4: Plug ODO cable
Step 5: Processing… Wait 30s Step 6: Successfully!!!
2.5. Some common errors
Read wrong present value of ODO
- Reason: Bad connection of solder points, EEPROM, select wrong bike year.
- Repair: Check connection diagram again, bike version, processor type.
Can read but can’t write.
- Reason: False connecting plug, Adapter circuit error.
- Repair: Check connection diagram again, change Adapter
Save km data fail to “0000”.