Autoshop Smarttool - Program Smart Key

SMARTTOOL – BEST PROGRAMMER SMART KEY HONDA, YAMAHA, SUZUKI AND PIAGGIO
22
http://autoshopvn.com
 Preparation:
- SMTF00- SMART TOOL.
- SMTF02- Cable for HONDA AIRBLADE/ VARIO/ CLICK
- SMTF08- KEY ADAPTER.
- SCU (smart key control unit).
 The steps taken on the Smart Tool.
Step 1: Select “REFLASH SCU” Step 2: Press Enter
Step 3: Press Enter Step 4: Enter ECMID
Step 5: Enter KeyID Wait 1.5 to 2 mins
Successfully!!!
 Notes:
- When restoring data of SCU then all old data is erased.
- In step 4 enter ECMID of ECM or ECMID previously read from SCU
- In step 5 enter KEYID random or not enter and select ENT
2.5 Program Smart Key
 Purpose:
- Add key by key
- Register new key when all keys lost.
- Replace SCU and ECM.
 Preparation:
- SMTF00- SMART TOOL.
- SMTF02- Cable for HONDA AIRBLADE/ VARIO/ CLICK
- SMTF08- KEY ADAPTER.
 The steps taken on the Smart Tool