Autoshop Smarttool - Piaggio & Vespa Key Programming

SMARTTOOL – BEST PROGRAMMER SMART KEY HONDA, YAMAHA, SUZUKI AND PIAGGIO
31
http://autoshopvn.com
C. PIAGGIO & VESPA
1. Read IC/ECU: PNG04/ PGS02/ PGT01/PGT06
 Purpose
- Register new FOB when all keys lost.
 Preparation
- SMTF00 - SMARTTOOL.
- SMTF03 - PIAGGIO/ VESPA cable.
- SMTF08 – key Adapter
- SCU (smart key control unit).
 Steps taken on the Smart Tool:
Select “ PROGRAM KEY”  Piaggio
Step 1: Select “PGN04/PGS02/PGT01”
Step 2: Press Enter Successfully!!!
 Notes
- Way 1: Connect directly to OBD - diagnostic connector by OBD – Kline cable ( near battery)
- Way 2: Connect on the table, to IC/ECU connector. Search diagram on mobile app website:
www.autoshopvn.com
- After reading keyID, write T5 immo chip by TmPro, CnMini, VVDI, KDX2, KDYZ…
2. Read IC/ECU: ACI6XX/ ACXXI/ ACXX1
 Purpose: Register new FOB when all keys lost.
 Preparation
- SMTF00 - SMARTTOOL.
- SMTF03 - PIAGGIO/ VESPA cable.
- SMTF08 – key Adapter
- SCU (smart key control unit).
 Steps taken on the Smart Tool: