Autoshop Smarttool - Read ECMID; View the Latest ID; Reflash SCU

SMARTTOOL – BEST PROGRAMMER SMART KEY HONDA, YAMAHA, SUZUKI AND PIAGGIO
21
http://autoshopvn.com
 Notes:
- Check the connection points, cable carefully.
- “QUICK READ KEYID”- it take about 1 - 1,5 minutes to read KEYID
- Ensure a stable power source.
- If the reading KeyID is faulty, continue reading until 100%.
2.2 Read ECMID
 Purpose:
- When SCU is broken, it is necessary to replace.
- Reading ECMID from SCU.
- ECMID need to synchronize between the engine box (ECM) and Smart key box (SCU).
 Preparation
- SMTF00- SMART TOOL.
- SMTF02- Cable for HONDA AIRBLADE/ VARIO/ CLICK
- SMTF08- KEY ADAPTER.
- SCU (smart key control unit).
 The steps taken on the Smart Tool
Step 1: Select “READ ECMID” Step 2: Press ENT
Successfully!!!
 Notes:
- Reading ECMID without soldering.
- To read ECMID, the FOB must be synced with SCU.
2.3 View the latest ID
 Purpose:
- View the latest KeyID without reading again.
 The steps taken on the Smart Tool.
Step 1: Select “VIEW THE LASTEST ID” Step 2: The latest KeyID
 Notes:
- Reading KeyID successfully before using this function.
2.4 Reflash SCU
 Purpose:
- Restore data of SCU, repair the SCU which software error