SMARTTOOL – BEST PROGRAMMER SMART KEY HONDA, YAMAHA, SUZUKI AND PIAGGIO
19
http://autoshopvn.com
Preparation:
- SMTF00- SMART TOOL.
- SMTF01- Cable for HONDA PCX/SH125/150/MODE
- SMTF08- KEY ADAPTER.
- SCU (smart key control unit), the new FOB.
The steps taken on the Smart Tool:
Step 1: Select “TEST FOB SCU” Step 2: Turn on the FOB
Successfully!!!
2. HONDA AIRBLADE, LEAD, VISION, VARIO, CLICK
2.1 Read KeyID
Purpose:
- When all keys lost
- Read KeyID to register new FOB.
Preparation:
- SMTF00- SMART TOOL.
- SMTF02- Cable for HONDA AIRBLADE/ VARIO/ CLICK
- SMTF08- KEY ADAPTER.
- SCU (smart key control unit).
Special notes:
- Check cable, solder, make sure the machine is firmly fixed.
- When reading KeyID, don’t touch and move the smart box
- Wait to complete 100% reading KeyID and display KeyID.
- During reading, if the connection was disconnected or loose the solder, the device will
automatically calculate the KeyID at the moment. Then to repair SCU, use the function "REFLASH
SCU” and " REPLACE SCU "to synchronize the data for SCU.
- If unsuccessful reading (not enough 100%, unread ID), pls continue reading 2, 3 times until finish
100% and get KeyID on the screen.
To Next Page
Loading...