Service Commands
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 107
Clear Log
This menu selection allows you to clear the entire Log Menu for all
events previously recorded.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press
!
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
2
To select SERVICE, press 5.
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
3
To select LOG, press 2.
SERVICE
1 FIRE ALARMS
2 PREALARMS
3 EARLY WARNINGS
4 FAULTS
5 DISABLE/ENABLE
6 USER OPERATIONS
7 TESTS
8 ALL EVENTS
9 LOG SETUP
19:23
LOG
4
To select LOG SETUP, press 9.
SERVICE
LOG>LOG SETUP
1 READ PARAMETERS
2 READ FILTER
3 CLEAR LOG
14:23
SERVICE
LOG>LOG SETUP
1 READ PARAMETERS
2 READ FILTER
3 CLEAR LOG
14:23
Comments:
To enter READ PARAMETERS, go to step 5a.
To enter READ FILTER, go to step 5b.
To enter CLEAR LOG, go to step 5c.
To Next Page
Loading...
Need help?
General
