Autronica BS-310 - Page 90

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 88
Step Actions to be taken Display Indication
2
To select SERVICE, press 5.
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
3
To select TEST, press 1.
SERVICE
TEST
1 DETECTION ZONE TEST (EN 54)
2 OUTPUT TEST
3 OUTPUT CONTROL
19:23
SERVICE
TEST
1 DETECTION ZONE TEST (EN 54)
2 OUTPUT TEST
3 OUTPUT CONTROL
19:23
4
To select DETECTION ZONE TEST, press 1.
SERVICE
DZ TEST
1 ENTER TEST MODE
2 LEAVE TEST MODE
19:23
SERVICE
DZ TEST
1 ENTER TEST MODE
2 LEAVE TEST MODE
19:23
5
To ENTER TEST MODE, press 1.
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
6
Use the keyboard to enter text into the input box
-
OR ,- as shown in this example:
To select a Zone Name, press
then scroll downwards by pressing
9
YZ
or move up again by pressing
6
PQR
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
www.ukpanels.com