Introduction, warranty
3
500 Series
INTRODUCTION
AVA NT Tecno Oy wants to thank you for purchasing this AVA NT loader. It is the result of Avants
long experience in design and manufacturing of compact loaders.
We ask you that you read and understand the contents of this manual completely before operating
the loader. This will improve your operating and maintenance efficiency, help avoid breakdowns
and damage and extend your machines life.
Contact your local AVA NT dealer for advice regarding service, parts and any
problems relating to the operation of your AVA NT.
AVANT 500 SERIES WARRANTY
This warranty specifically applies to the AVA NT 500 series loaders only and not to any attachments used with
this product.
Any repairs or modifications performed without the prior authorisation of AVA NT Tecno Oy will cancel this
warranty.
During the first year of operation or first 750 hours (whichever is the soonest) AVA NT Tecno Oy warrants
to replace any part or repair any defect which may occur, subject to the terms detailed below:
1) The product has received regular maintenance in accordance with schedules given by the manufacturer.
2) Any damage caused by operation in a negligent manner or exceeding the approved specifications detailed
in this manual is excluded.
3) AVA NT Tecno Oy accepts no responsibility for interruption to working or any other consequential losses
resulting from any failure of the product.
4) Only AVA NT Tecno Oy approved replacement or original quality parts shall be used during routine
maintenance.
5) Any damage caused by the use of incorrect fuel, lubricants, cooling liquid or cleaning solvents is excluded.
6) The Avant Warranty excludes any consumable parts (e.g. tyres, spark plugs, batteries, filters, belts etc.)
except where it can be clearly shown that these parts were defective on original supply.
7) Any damage caused resulting from the use of attachments not approved for use with this product is excluded.
8) In the event a fault occurs which is attributable to manufacturing or assembly defect you should arrange
to return your AVA NT to your authorised dealer for repair. Travel and freight cost are excluded.
IDENTIFICATION OF THE LOADER
Write down the following information about your loader, it will help you when ordering parts etc.
1. Model: AVA NT_____________________Purchase date:______________________________
2. Serial number:________________________________________________________________
3. Engine serial number:__________________________________________________________
The serial number and model of the loader are printed on the manufacturers plate (decal no. 9,
see page 6). Location of engine serial number can be found in the operating manual of the engine.
To Next Page
Loading...
