Receiving a call
112
Ignoring an incoming call
You can terminate an incoming call alert without answering the call or
sending a Decline Call reason by pressing the Ignore context-sensitive
soft key or by pressing the Goodbye fixed key. The caller continues to
hear the ringing tone but is unaware that you are ignoring the call.
You can configure the Call Ignore feature to either Local or Network.
When Call Ignore is configured to Local, only that IP Deskphone is
affected, and it stops ringing when you press the Ignore context-sensitive
soft key. When Call Ignore is configured to Network and you press the
Ignore context-sensitive soft key, the IP Deskphone stops ringing, and a
message is sent to the network indicating that you are busy at all SIP
IP Deskphones you are logged on to, and that server should stop trying to
contact you.
To configure the Ignore feature to Local or Network press the Prefs
context- sensitive soft key, select Feature Options, and then select Call
Ignore Action from the menu. Press the Change context-sensitive key to
abc 3. Press the abc/123 context-sensitive soft
key to toggle between alphabetic and
numeric characters.
4. Use the dialpad to edit the Call Decline
Reason.
5. Choose one of the following:
— Press the Save context-sensitive
soft key to confirm the changes.
— Press the Back context-sensitive
soft key to return to the previous
menu without editing the Call
Decline Reason.
To Next Page
Loading...
