Avaya 1230 - Attaching the Foot Stand (Optional)

Using your Avaya 1230 IP Deskphone
47
Figure 8: IP Deskphone connections
Attaching the foot stand (optional)
Attach the foot stand in the appropriate slots depending on the desired
angle for your IP Deskphone. If you insert the foot stand into the upper
slots, your IP Deskphone sits at a 25-degree angle. If you insert the foot
stand into the lower slots, your IP Deskphone sits at a 55-degree angle.
1. Align the bottom tabs on the foot stand with the position 1 slots or the
position 2 slots on the back of your IP Deskphone.
WARNING Ensure that the protective rubber cap on the
Expansion Module port is in place when the port is not in use.
Connection of anything other than the proper Expansion
Module connector to this port can cause damage to the IP
Deskphone.