Dynamic Addressing Process
Issue 1 April 2007 19
6. When connected, the telephone looks for an upgrade script file.
7. The HTTP server sends and identifies an upgrade script.
The GET message might have to be sent several times. Each time the GET message is
sent, all IP telephones display one of the following messages:
For HTTP, n is the number of HTTP requests made by the telephone and uri is the URI for
the current HTTP request.
8. While the upgrade script file is being downloaded, all IP telephones display the following
message:
where n is the number of the IP address obtained from the HTTP server, sc is the status
code of the HTTP response and etag is the value of the ETag header.
9. While the application file is saved in flash memory, all IP telephones display the following
message:
with the percentage of the file and the number of elapsed seconds incremented as the
application file is stored in flash memory.
10. The telephone contacts the Avaya Media Server and attempts to log in.
All IP telephones display the following prompts for an extension:
HTTP: n uri
HTTP:n sc etag
Saving to flash
1%, 1 secs
Login
Enter Extension
Enter Extension and press Enter or OK
To Next Page
Loading...
