Restart Scenarios
68 1600 Series IP Telephone Installation and Maintenance Guide
3. Press the * key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files:
Boot File Needs to be Upgraded
The telephone automatically downloads an upgraded boot file if applicable. In this case, these
messages appear:
1. The telephone displays:
2. While the hardware is being initialized, the telephone displays:
3. While either the application file if there is one or the boot code is uncompressed into RAM,
the telephone displays:
This message counts the seconds as the application file (replboot_v3.app in this example)
is being written into RAM.
If this condition applies: See:
Boot File Needs to be Upgraded
Boot File Needs to be Upgraded on
page 68.
Latest Boot File Loaded/No Application File or
Application File Needs to be Upgraded
Latest Boot File Loaded/No
Application File or Application File
Needs to be Upgraded on page 71.
Latest Boot File and System-Specific
Application File Already Loaded
Latest Boot File and System-Specific
Application File Already Loaded on
page 72.
Restarting...
Initializing
Loading: 5 secs
replboot_v3.app 4084KB
To Next Page
Loading...
