Avaya 2410 - Navigating Home Screen Pages

To make a call to an entry in the Call Log:
1. From the Home screen, press the Log softkey.
o The Call Log Summary screen is displayed.
2. Use
and to scroll through the Call Log Summary pages.
3. When you locate an entry you want to call, press the button corresponding to the entry.
o The Call Log Detail screen for this entry is displayed.
4. Press the Call softkey to make the call.
Note: You can make calls directly to extensions using this method. To call outside numbers, go off-hook and dial the necessary
code (for example, “9” for a local or seven-digit call or “9” and “1” for a 10-digit call). Then, press the Call softkey to make the
call.
To save an entry in the Call Log to your Speed Dial List:
1. From the Home screen, press the Log softkey.
o The Call Log Summary screen is displayed.
2. Use
and to scroll through the Call Log Summary pages.
3. When you locate an entry you want to save, press the button corresponding to the entry.
o The Call Log Detail screen for this entry is displayed.
4. Press the Save softkey.
o The Edit Name screen is displayed showing the name and number information from the Call Log.
5. Do one of the following:
To save the entry to your Speed Dial List as shown on the current screen, press the Save softkey.
To edit the telephone number to include a code required to access an outside line (for example, “9”), press the feature
button to the left of the Number field twice. (The cursor appears at the beginning of the telephone number.) Press the
feature button to the right of Insert Mode so that you can enter characters at the beginning of the number, and then
make your changes. When you are done entering changes, press the Save softkey.
o The entry is saved to your Speed Dial List.
Note: If you see the message “Speed Dial List Full,” you must delete some Speed Dial List entries before you can add new
entries.
To delete an entry from the Call Log:
1. From the Home screen, press the Log softkey.
o The Call Log Summary screen is displayed.
2. Use
and to scroll through the Call Log Summary pages.
3. When you locate an entry you want to delete, press the button corresponding to the entry.
o The Call Log Detail screen for this entry is displayed.
4. Press the Delete softkey.
o The entry is deleted from the Call Log.
Priority Calling
To place a priority call:
1. Press Priority.
or, Dial the Priority Calling code *1.
{dial tone}
2. Dial the extension.
Note: If your call is not answered and you wish to redirect it to coverage, press Go to Cover while the call is ringing.
To change a regular call into a priority call:
1. Press Priority.
2. Wait for the called party to answer.
Note: If you still receive a call waiting ringback tone, wait a few minutes and try again.
2410 Digital Telephone End User Guide | 14 | Page