On soft hold A call put on hold during a transfer or conference.
Feature active
Feature on left side of the display currently is active.
Feature active
Feature on right side of the display currently is active.
Feature pending
Your request is being processed but is not immediately available.
Status Icons for Feature-Specific Applications
The following icons are displayed in certain feature-specific applications.
Icon Definition
Feature status
Feature specific status.
Feature status
Feature specific status.
Feature status
Feature specific status.
Conventions
Conventions Used in the Procedure Descriptions
LWC CnLWC AutCB Timer Information that is offset represents the display screen. The second
line appearing on the display will most likely list the features you can
access with the softkeys.
{handset tones} The tone that appears in curly quotes after a step, such as {dial tone},
indicates what you should hear from your handset (or speakerphone)
after successfully performing that step.
Special Instructions
Use the following special instructions for operating your telephone.
• To operate a feature, you must have the handset off-hook (removed from the cradle of the telephone) or the speaker or
speakerphone on unless otherwise noted.
• If you receive an intercept tone (high-pitched, alternating high and low tone) while attempting to operate any feature,
you have taken too much time to complete a procedural step or have made a dialing error. Hang up, get dial tone, and
return to Step 1.
2410 Digital Telephone End User Guide | 7 | Page
To Next Page
Loading...
